Interaction of Groundwater-Relevant Ca2+ and Mg2+ with Natural Clay from Derna, Libya: XRF Characterization and Changes in Dissolved Cation Concentrations
Keywords:
Groundwater, calcium, magnesium, natural clay, XRF, EDTA, water hardness, cation–solid interactionAbstract
Calcium and magnesium are the principal divalent cations responsible for most natural-water hardness, and their concentrations may change during contact with clay-rich materials. This study evaluated changes in dissolved Ca²⁺ and Mg²⁺ after short-term contact with a natural green clay from Derna, Libya, using levels derived from local groundwater. The reference sample (GW-6) contained 78 mg/L Ca²⁺ and 31 mg/L Mg²⁺; Low and High levels were 40/15 and 156/62 mg/L, respectively. XRF characterization with Bruker S2 RANGER and PANalytical MiniPal 4 indicated a bulk composition containing approximately 34 wt.% SiO₂, 9 wt.% Al₂O₃, 5.37 wt.% Fe₂O₃, and 20.8–20.9 wt.% CaO equivalent. Separate Ca-only and Mg-only solutions were contacted with 2.00 g clay in 40.0 mL for 15 min at room temperature and analyzed by EDTA titration. Apparent Ca²⁺ reductions were 6.67%, 4.11%, and 3.45% at Low, Actual, and High levels, while Mg²⁺ reductions were 36.00%, 12.24%, and 8.81%. Because the clay-contact tests were not independently replicated and EDTA does not identify the mechanism responsible for cation loss from solution, the findings are interpreted descriptively as evidence of cation–solid interaction rather than proof of adsorption, ion exchange, or precipitation.

